Jindal Composite Product Range
Pipe A (White) – HDPE, for Cold water distribution, Temp. -40ºC to 60ºC,
Pipe B (Orange) – MDPE / PE-RT, for hot water distribution, temp -40ºC to 95ºC
Pipe C (Yellow) – HDPE, for oxygen and gas supply, temp -20ºC to 50ºC
Pipe UV (Black) – HDPE / PE-RT, for hot water distribution, temp -40ºC to 95ºC ________________________________________________________________
Jindal MLC Pipes are manufactured as per IS 15450
Compression or Screw Fittings
Compression Fittings combine the positive feature of high reliability with a simple installation technique. The fittings do not require any special tools. The permanent pipe joint is achieved by compression i.e. by tightening the nut against the coned-shaped olive. The profiles of the two pieces are designed to cause a progressive shrinkage of the coned-shaped olive and to distribute the compression forces across the contact surface. A seal housing has been designed with a special slip-proof profile called O-rings that come into direct contact with the pipe. The simplicity and economic aspect of this system is based on the use of spanners, standardized threads (GAS ISO), which make it possible to connect with any system.
Advantages of Screw Fittings
* Developed with advance forging technique.
* Easy and convenient installation.
* Optimized structure design.